ORAL DISSOLVING FILM SCIENCE

The evidence behind every Melt.

See how the format works, what goes into each formula, why the doses were chosen, and what we verify in the finished product.

How to use a Melt.

One strip. Three steps. Nothing to mix or measure.

Individual product directions may vary. Follow the directions on your Meltiva package.

STEP 1

Tear open one sachet.

Each Melt is individually wrapped. Open one when you are ready to use it.

STEP 2

Place the strip as directed.

Remove the film with dry hands and place it in your mouth according to the directions on your product.

STEP 3

Leave the rest to the film.

Let the strip dissolve completely.

No water is needed to dissolve the film itself.

ACTUAL FINISHED PRODUCT

Watch the strip break down.

This is the finished product in real time.

When the film comes into contact with moisture in the mouth, the film-forming system softens and begins to disintegrate, releasing the ingredients contained in it. Oral thin-film performance depends on the formulation and physical properties of the film.

The film disappears.
The ingredient still does the work.

How quickly the film dissolves and how an ingredient behaves after release are two different questions.

Depending on the active and formulation, released ingredients may interact with tissues in the mouth or ultimately be swallowed and absorbed through the digestive system. The format alone does not establish superior absorption for every ingredient.

Actual Meltiva dissolution footage
0:00Intact 0:XXSoftening 0:XXBreaking down 0:XXDissolved

Film the actual finished product under a repeatable protocol. Do not manufacture a pretty animation and call that dissolution time. If SKUs differ meaningfully, show the measured time for each formula.

ONE MELT, OPENED UP

One Melt, from the outside in.

Start with the box. Pull out one sachet. Open it to one serving. Then zoom into the film itself.

One continuous visual should carry the eye from package → sachet → strip → enlarged film composition.

Add one continuous 3D composition
Box → sachet → strip → magnified film

THE BOX

30 Melts. One place.

The outer package keeps your individually wrapped servings together.

THE SACHET

One strip, individually sealed.

The sachet protects the film from handling and environmental exposure until you are ready to open it.

THE STRIP

One pre-portioned serving.

No scoop. No measuring. No counting capsules.

INSIDE THE FILM

The system that carries the formula.

Zoom in to show the functional parts that make the finished film work.

FILM BASE

The dissolving structure

The film-forming system gives the strip its shape and allows it to break down in the mouth.

ACTIVE FORMULA

What the Melt is built around

The active ingredients for that specific formula, with the amounts disclosed on the label.

FLAVOR + FINISH

The part you experience

The ingredients that shape taste, texture and the finished experience of taking the film.

Small format. Deliberate build.

One strip has to carry the formula, hold together in the sachet, taste right, and then disappear when you use it.

WHY A MELT?

Why put a supplement in a strip?

Because the format can remove a surprising amount of friction from taking one.

WHAT THE FORMAT CHANGES

Less between you and taking it.

✓

No pill to swallow

The film breaks down in the mouth instead of being swallowed whole.

✓

No water needed to take the film

You do not need a drink simply to get the serving down.

✓

No mixing or measuring

One strip is already portioned.

✓

One serving is easy to keep close

Each strip is individually wrapped.

✓

No bottle, scoop or shaker

There is less equipment between you and taking it.

WHAT THE FORMAT DOES NOT AUTOMATICALLY MEAN

A Melt does not rewrite biology.

No

Does everything absorb through the mouth?

That depends on the ingredient and formulation.

No

Does a film automatically mean better bioavailability?

A different delivery format alone is not proof of better absorption.

No

Does every Melt work immediately?

Different ingredients have different evidence, mechanisms and timelines.

No

Can you put any formula into a strip?

A thin film has limited physical capacity compared with formats designed for gram-scale ingredient loads. Oral-film formulation requires attention to ingredient load, mechanical properties, stability and disintegration.

We use melts where melts make sense.

The formula has to fit the format. Not the other way around.

A fast-dissolving film is not the same thing as a fast-acting claim.

PHARMACIST FORMULATED

Pharmacist formulated should mean more than a badge.

A pharmacy counter teaches you to look past the promise on the front and start asking questions about what is actually on the back.

The value is not the credential by itself. It is the discipline behind the formula.

Add real Supplement Facts panel
Annotate: form · amount · overlap · evidence · purpose

PURPOSE

Why is this ingredient here?

Every ingredient should have a defined role in the formula.

FORM

Which exact form are we using?

The generic ingredient name does not always tell the whole story. The form, extract, strain or standardization can determine how closely the ingredient matches published research.

AMOUNT

How much is actually in it?

An impressive ingredient name means less when you cannot see the amount. Meltiva discloses the amounts of its active ingredients rather than using a proprietary blend.

EVIDENCE

What was actually studied?

Ingredient. Form. Amount. Population. Study length. Outcome. Those details determine how closely research applies to the formula in front of you.

OVERLAP

What else might someone already be taking?

Ingredients do not exist in isolation once you start combining products. Shared vitamins, minerals, botanicals and stimulants change total intake.

FILM FIT

Does it actually belong in an oral film?

The ingredient still has to work within the physical constraints of a thin strip.

EXPECTATIONS

What should someone realistically expect?

A study measured after an hour is not the same thing as a study conducted over eight weeks. The timeline is part of the evidence.

THE MELTIVA STANDARD

That became the Meltiva standard.

Clear purpose. Exact forms. Disclosed active amounts. No proprietary blends. No pretending every ingredient has the same level of evidence.

RESEARCH · FORMULATION · TESTING

Three kinds of proof.
Three different questions.

01Ingredient research

What has been studied?

Human studies can help us understand an ingredient, preparation, amount or outcome.

It does not automatically prove the finished Meltiva formula.
02Formulation rationale

Why did we build it this way?

This is where ingredient role, form, amount and combination come together.

It explains our decisions.
03Finished-product testing

What does the lab find in the actual product?

Finished-product testing evaluates the product against the specifications included in that test program.

It does not prove a health outcome.

We keep those lines visible.

A study on one ingredient is not a clinical trial of the finished Melt. A passing laboratory result is not clinical evidence of benefit.

FORMULA EXPLORER

Why these ingredients.
Why these doses.

Choose a Melt to see every active, how much we use, the role it plays, and how closely the available human research matches the ingredient in our formula.

When the research used a different dose, extract, strain, preparation or population, we show the difference.

Closest human evidenceUnusually relevant form, amount or use.
Supporting human evidenceRelevant human evidence exists, with important differences.
Formulation rolePart of the formula, but not presented as a direct dose/form match to human outcome research.

CALM

TRANQUILITY

Built around a calmer state without turning the formula into a sleep product.

L-Theanine75 mg+
Role

Core calm-support ingredient.

What has been studied

Human research has examined L-theanine in relaxation, attention and stress paradigms. A 50 mg study examined EEG activity, while other acute studies have used 200 mg.

How Meltiva compares

TRANQUILITY contains 75 mg. That gives us relevant human ingredient evidence, but it is not the same dose as the 200 mg studies.

Supporting human evidence View L-theanine research
50 → 75 → 200 mg50 mg — human EEG study
75 mg — TRANQUILITY
200 mg — other acute human research

Different studies. Different endpoints. Dose comparison does not imply equivalent outcomes.
GABA25 mg+
Role

Supporting calm-focused active.

What has been studied

Oral GABA has been studied in human stress/relaxation paradigms, including research using larger amounts than TRANQUILITY contains.

How Meltiva compares

TRANQUILITY uses 25 mg. We therefore treat this as supporting ingredient evidence rather than a direct dose-match claim.

Supporting human evidence
Magnolia Bark Extract10 mg+
Role

Supporting botanical.

Research context

Human research exists on proprietary preparations combining Magnolia with other botanicals, including Magnolia/Phellodendron combinations. That does not directly establish an outcome for 10 mg of Meltiva's standalone Magnolia extract.

Formulation role
Lavender Oil8 mg+
Role

Supporting botanical and sensory component.

Research context

Some of the best-known oral lavender trials used 80 mg/day of a specific standardized preparation, Silexan, over several weeks. Meltiva's 8 mg lavender oil should not be presented as equivalent to that preparation or amount.

Formulation role
Vitamin B61 mg+
Role

Nutritional support within the formula.

Formulation role

WHEN WAS THE RESEARCH MEASURED?

Not every ingredient is studied on the same clock.

Some studies measure an acute response. Others look at repeated use over days or weeks. That difference matters.

CaffeineMeasured at 15 min · 45 min
Methylliberine1 hr · 2 hr · 3 hr after the fourth dose
Zinc L-Carnosine5-day study context
Saffron8-week study context
MinutesHoursDaysWeeks

Study timing is not a Meltiva onset promise.

It tells you when that particular study looked for an outcome.

USING MORE THAN ONE MELT?

Look at the total, not just the boxes.

Some Meltiva formulas share active ingredients. Using more than one formula changes your total intake.

Active
Tranquility
Ignite
Steady
Biome
Curb
Hydrate
L-Theanine
75 mg
—
35 mg
—
—
—
Vitamin B6
1 mg
4 mg
25 mg
—
—
—
Caffeine
—
80 mg
—
—
—
—

Add the labels before you add the products.

Compare the Supplement Facts for every formula you plan to use. IGNITE also contributes caffeine to your total daily caffeine intake.

Compare all six formulas

If you take medications, have a medical condition, are pregnant or nursing, or are unsure whether products are appropriate to combine, speak with a qualified healthcare professional.

A FORMULA STILL HAS TO BECOME A FILM

Good ingredients on paper are only the beginning.

The formula still has to work inside a thin oral film.

Use real manufacturing and film imagery here. No generic laboratory stock footage.

Add film sheet / cut film / macro texture / sachet sealing media

INGREDIENT LOAD

There is only so much room.

A strip is a low-mass format. Ingredient selection has to respect that constraint.

UNIFORMITY

One strip should represent one serving.

The formulation and manufacturing process have to produce consistent finished units.

STABILITY

It has to hold up before you open it.

Film, formula and package need to remain suitable through the product's intended shelf life.

DISSOLUTION

It still has to disappear properly.

The finished film has to soften and break down as designed.

EXPERIENCE

And you still have to want to take it.

Taste, texture and mouthfeel matter in a format that dissolves in the mouth.

The ingredient has to fit the evidence.
The formula has to fit the film.

Oral-film literature treats mechanical properties, ingredient/excipient selection and disintegration as meaningful parts of film performance rather than incidental details.

TESTING

Research informs the formula.
Testing checks the product.

They answer different questions.

01 — RESEARCH

What has been studied?

The ingredient-level evidence.

02 — FORMULATION

What did Meltiva actually use?

The form, amount and finished combination.

03 — TESTING

What does the finished-product analysis show?

The results from the tests actually performed.

INDEPENDENT FINISHED-PRODUCT TESTING

Independently tested by Eurofins.

Choose a Melt to see the available testing for the finished formula and open the original report.

The page should show exactly what was tested for the relevant lot rather than treating “lab tested” as one undefined universal test.

Add actual Eurofins report crop

LAB RESULT BROWSER

Open the reports yourself.

Only testing actually performed for the selected lot should appear here.

SELECTED FORMULA

TRANQUILITY

Lot[ADD LOT]
Test date[ADD DATE]
LabEUROFINS
Add a Lab report block in the Theme Editor to populate only the tests actually performed for this lot.—

WHAT DOES A PASSING RESULT MEAN?

It means the reported result met the applicable specification for that test. It does not mean Eurofins clinically tested the benefits of the formula.

Add a Lab report block, report thumbnail, and original report URL

RESEARCH LIBRARY

Read the research.

See what was studied, why we reference it, and what is different from the Meltiva formula.

Every study card uses the same structure. “What is different from Meltiva” is mandatory.

QUESTIONS WORTH ASKING

Questions worth asking.

Clear answers are part of the science.

Are the finished Meltiva formulas clinically studied?+

No. The finished Meltiva formulas have not been clinically studied as complete products. The research shown here evaluates individual ingredients or related preparations. We keep that distinction visible rather than presenting ingredient research as a clinical trial of Meltiva.

Does everything in a Melt absorb through the mouth?+

No. The strip dissolving in the mouth does not mean every active is absorbed through oral tissue. What happens after release depends on the ingredient and formulation.

Does a Melt automatically absorb better?+

No. A different delivery format alone does not establish greater bioavailability.

Does a Melt automatically work faster than a capsule?+

No. The film itself can dissolve quickly. The time it takes for an ingredient to produce a measurable or noticeable effect is a separate question.

The 80 mg caffeine study, for example, observed caffeine effects from coffee, an energy drink, a capsule and a dissolvable strip rather than establishing universal superiority of the strip format.

Then why use a Melt?+

Because the experience still matters.

No pill to swallow. No water needed to dissolve the film. No mixing. No scoop. One individually wrapped serving that is easy to keep close.

We do not need an unsupported absorption claim to make those advantages useful.

Why aren't all Meltiva doses identical to study doses?+

Because a research paper and a finished formula are not the same thing.

Sometimes Meltiva's amount aligns closely with published human research. Sometimes there are meaningful differences. When there is a difference, we show it.

Why don't you use proprietary blends?+

If an active matters enough to include, its amount matters enough to show you.

What does pharmacist formulated mean?+

It means pharmacist thinking is applied to the formula.

Purpose. Ingredient form. Amount. Evidence. Overlap. Cautions. Film fit.

It does not turn a dietary supplement into a medication or a pharmacist into a substitute for your personal healthcare provider.

What does Eurofins testing prove?+

It tells you the result of the tests actually performed on the finished product.

It does not prove that the formula produces a clinical outcome.

Can I take more than one Melt?+

Start by comparing the labels.

Some formulas share ingredients, and IGNITE contains caffeine. Your total intake matters more than the number of boxes in your bag.

How quickly should I expect to notice something?+

It depends on the formula and the ingredient.

We do not put every Melt on the same clock. Where useful, the Formula Explorer shows when the relevant human research measured its outcomes so you can distinguish acute studies from research based on repeated use.

THE STANDARD

Know what you're taking.

See every active. See every amount. Read the research. Open the lab report. Then choose the Melt that makes sense for your moment.

Six Meltiva sachets